How to Cock a Crossbow?

Having the best crossbow makes your hunting the most reliable, even perfectly comfortable. It does not matter that you are playing as a beginner or professional hunter.

But to maintain your crossbow is very important, by going through all the particular aspects such as cocking the crossbow, waxing the string of crossbow regularly before going to any hunt.

Cocking a crossbow is considered a much-complicated task according to so many archers, while in actuality, it is not just after reading our comprehensive guides, in a couple of minutes.

However, it determines the required draw weight that is used to cock. It also depends on your personal preferences and experiences to purchase a good device for the cocking mechanism.

There are three different ways and some of the basic tips for cocking the crossbow including rope cocking device, bare hands, and integrated rope cocking device.

So, without making a while, keep an eye on our honest and reliable guide, by paying attention

Basic Steps of Cocking a Crossbow

By obeying the few cocking injunctions, you can make your crossbow the more efficient and consistently accurate for killing the targets.

The cocking techniques are very simple and easy that can be applied for any sort of crossbows such as the compound crossbow, recurve crossbow and pistol crossbow, etc.

So, there are some basic steps by which you can cock the crossbow manually or using the different cocking devices, within a while.

STEP#1:

Crossbow provides hunters a very comfortable zone to use it in a safer way. There exists a safety tool on the side of a crossbow or may be located on the rear of the sides bridge.

It gives full protection from the accidently bolts firing by moving it against the stock, especially during cocking the crossbow.

STEP#2:

Move the crossbow to the opposite direction of the floor for acquiring the ground support. Now, place the middle of the crossbow between your knees for gaining overall control during yanking the strings backward, stressfully.

STEP#3

To prevent from slipping aspects during cocking the crossbow, just use the junction of stirrup by placing the bowl of your foot in it.

Stirrup plays a vital mechanism for protecting the arrows, bolts as well as your crossbows during the cocking process.

STEP#4:

Now, draw back the crossbow string by applying the consistent and equal force along a couple of barrels to the latching point, even by using the cocking device.

Some crossbows have a long base for providing the hunter’s most comfortable grip such as the compound crossbow and recurve crossbow, due to which you need to bend a little towards the crossbow while cocking it carefully.

STEP#5:

Now it is time to load the bolts or arrows in your maintained crossbow and make the most reliable and accurate shoots on the actual targets.

In this way, you will be able to cock your crossbow manually or even by using the cocking devices, just according to your deep desire within a few minutes, easily.

Essential Tips for Cocking the Crossbow

There are two basic tips and tricks that will surely make the cocking mechanism of the crossbow quite easy, mentioned below.

1. Shorten the Cocking Rope

Cocking the crossbow by using the shorter length of rope is a bit of a favorable method. The reason for it is that few crossbows exist with the long size of stock due to which you cannot lean towards the stock while cocking the crossbow.

In the market, too many long cocking cables are available which may affect some injuries in your shoulders and backbone. Therefore, you should assure the shorter length of cocking rope for gaining accurate results without any mislaying.

2. Marking the String of Crossbow

The one thing that you should be added to enjoying your cocking experience is to maintain a string position in a most consistent way. You should draw the small marked points on the rail of the crossbow for centered the string in the trigger-latch spot.

It is very essential to keep the string at equidistance positions, attentionally. Because it ensures better and uniform performance in killing the animals.

Cocking with a Rope Cocking Device

Cocking a crossbow by using the cocking rope is one of the most favorable and recommended methods by professional hunters.

It provides a safer way to cock the crossbow without any injury in your body muscles. The manufacturers have made this device by obeying the archer’s exceptions.

The adjustable cocking rope makes the cocking mechanism very easiest and simple. Here there is no need to mark the lines across either side of the string.

Just move the crossbow along the opposite side of the ground floor and place your foot over the foot claw of the bow. For gaining equal tension, hook the string with a pair of clumps.

Draw the string of your crossbow in the backward direction by using the crank handle for the movement of safety towards the firebolts.

Now, in this way, you get a cocked crossbow which will be ready to shoot a target, just after switching off the safety back to the stock.

On the other hand, numerous rope cockers are available in the market, designed according to their standard aspects that produce some difficulties in proper cocking.

This occurs due to the invariable and irregular lengths of the archers. Some crossbows come within the grooved sections just at the back end of stock for a rope cocker.

Pros

  • Quite simple and efficient to use
  • No injury chances during cocking  
  • Less expensive than cracking tool

Cons

  • Take more time to cock the bow
  • Maybe need to re-cock the device

Cocking with a Cranking Device

Cocking a crossbow by using the cranking device is also the well-known mechanism, used by the medieval hunters just after some new modifications.

This device is very useful and comes within the numerous models of the crossbows. On the other side, they may be available as a separate tool in the market.

The using methodology of this device is really simple. Just need to round the handle in a smooth way until the string latches in the right direction.

Like the rope cocking device, a small amount of draw weight is required to wind the handle for ensuring the string is centered exactly.

Pros

  • Normal draw weight is required
  • Exactly integrated and simplest
  • Virtual and no chances to injury

Cons

  • Much expensive for normal men
  • Waste much time to cock a bow

Things to Avoid While Cocking a Crossbow

There are few assumptions by which you should be familiar while cocking a crossbow. it will surely guide you in a pretty direct way to perform the cocking experience in a good manner.

  • While manually cocking a crossbow, just marked the string on both sides for mounting it in the uniform and evenly consistent way.
  • Only try to use the shorter length of cocking rope in your method like the cocking device to maintain the crossbow, perfectly.
  • During cocking the crossbow, keep an eye on the safety point that must be towards the shooting bolts direction.

The Final Verdict

Cocking the crossbow in the best way totally depends upon your skills and experience. For taking your experiences to the next level, the need for much practice is required.

Overall, we have escorted all the quick ways for cocking your devices in the easiest and simplest manner. So, just obey the few pieces of our guide and make it real!